Founded in London, UK. We respect your privacy.

Used by 1,500+ happy people

Form guide

Hack Squat Form Guide for Beginners: Set-Up, Foot Placement and Common Mistakes

How to set up the hack squat machine, where to put your feet, how deep to go and how to build it into a simple beginner plan.

TL;DR

  • Set your shoulders snug under the pads, feet flat and roughly shoulder-width in the middle of the platform, then lower under control and drive through your whole foot.
  • Feet lower on the platform usually puts more work on the quads; feet higher tends to share more with the glutes and hamstrings.
  • Go as deep as you can while your heels stay down and your lower back stays against the pad.
  • Beginners do well with 3 sets of 8 to 12 reps, stopping with 2 to 3 good reps left in the tank.
  • The hack squat sits between the back squat and the leg press: more balance support than a barbell, more of a squat pattern than a leg press.

8 to 12

Reps per set to start with

2 to 3

Good reps left at the end of each set

1 to 2

Hack squat sessions a week is plenty

To do a hack squat with good form, set your shoulders under the pads with your back flat against the backrest, place your feet roughly shoulder-width apart in the middle of the platform, then bend your knees to lower the sled under control and press back up through your whole foot. The machine guides the path for you, so your job is simple: keep your heels down, keep your back on the pad, and choose a depth and weight you can own on every rep.

The hack squat is one of the most useful leg machines in a commercial gym, especially if a loaded barbell still feels daunting. This guide walks you through set-up, foot placement, depth, cues, the mistakes we see most often, how it compares with the back squat and leg press, and how to programme it as a beginner.

What is a hack squat machine?

A hack squat machine has an angled backrest and a pair of shoulder pads that sit on a sled running along fixed rails. You stand on a sloped foot platform facing away from the machine, lean back into the pads and squat. Because the sled moves on a set track, you do not have to balance the weight the way you would with a barbell on your back. That lets you focus on your legs.

Where the name comes from is debated. One popular story links it to the early strongman George Hackenschmidt; another links it to the German word for heel, from an older version done with the heels together. Either way, the modern machine version is what most gyms mean today. Some gyms also have a reverse hack squat, where you face the pads, but this guide covers the standard version.

How do you set up the hack squat?

Machines vary between brands, so take a minute to look at yours before loading it. Then work through these steps:

  • Start empty. The sled itself often weighs a fair amount, so try a few reps with no plates before adding any.
  • Find the safety stops. Most machines have adjustable stoppers or catches that limit how far the sled can travel. Set them just below the depth you plan to reach.
  • Step in and lean back. Back flat on the backrest, head resting against the pad if there is one, shoulders snug under the shoulder pads.
  • Place your feet. Flat on the platform, roughly shoulder-width apart, toes turned out slightly, a little in front of your hips.
  • Release the handles. Hold the handles by the shoulder pads, press up slightly to take the weight, then swing the release levers out of the way.

When you finish your set, stand fully up and put the release handles back before stepping out. Never let go of the sled at the bottom.

Where should your feet go, and what does it change?

Foot position is the main thing you can adjust on a hack squat, and small changes shift how the movement feels. The general pattern, which matches how the leg press works too, looks like this:

  • Middle of the platform, shoulder-width. The best starting point. It spreads the work across your quads and glutes and suits most people.
  • Lower on the platform. Your knees travel further forward, which tends to bias the quads. It also asks more of your knees and ankles, so only move lower once the standard position feels comfortable.
  • Higher on the platform. Your hips bend more and your knees travel less, which tends to share more of the work with the glutes and hamstrings.
  • Wider stance with toes out. Often feels more natural for people with longer legs or stiffer ankles and brings the inner thighs in more.

Whichever position you choose, your knees should track in the same direction as your toes and your whole foot should stay in contact with the platform.

How do you do a hack squat, step by step?

  • Brace. Take a breath in, tighten your stomach as if you were about to be nudged, and keep your back pressed into the pad.
  • Lower. Bend your knees and hips together and let the sled travel down for about two to three seconds.
  • Reach your depth. Stop at the lowest point where your heels are still down and your lower back has not peeled off the pad.
  • Drive up. Push the platform away through your whole foot, keeping your knees in line with your toes.
  • Finish tall. Stand up until your legs are straight but not slammed into a locked position, breathe out, and go again.

How deep should you go on a hack squat?

Go as deep as you can control, not as deep as the machine allows. For many people that is around thighs parallel to the platform or a little lower. The two signs you have gone too far are your heels lifting and your lower back rounding away from the pad at the bottom. If either happens, set the safety stops slightly higher and build depth gradually over a few weeks.

Full-range reps with a lighter weight are generally a better choice for beginners than heavy, shallow reps. They train your legs through a bigger range and make it easier to spot form problems early.

Which cues help most?

  • Back glued to the pad. Your whole spine stays in contact from the first rep to the last.
  • Tripod foot. Feel your big toe, little toe and heel all pressing into the platform.
  • Knees follow toes. Do not let them cave inwards as you push up.
  • Slow down, strong up. Control the lowering and drive with intent on the way up.
  • Soft lockout. Straighten your legs at the top without snapping your knees back.

What are the most common hack squat mistakes?

  • Loading too much too soon. The machine makes it easy to stack plates. If your reps get shorter as the weight goes up, take some off.
  • Heels lifting. Usually a sign your feet are too low or you are going deeper than your ankles allow. Move your feet up slightly.
  • Lower back rounding at the bottom. Reduce depth until you can keep your back on the pad.
  • Knees caving in. Lighten the load and focus on pushing your knees out in line with your toes.
  • Bouncing out of the bottom. Dropping fast and rebounding takes tension off your muscles and makes control harder. Lower steadily.
  • Pushing through the toes. Keep your weight spread across the whole foot.

Hack squat vs back squat vs leg press: which should you do?

All three train your legs well. The differences are mostly about how much balance and trunk control each one asks for, and how close each one is to a standing squat.

ExerciseBalance neededTrunk demandGood for
Back squatHighHighWhole-body strength, carry-over to sport
Hack squatLowModerateBuilding leg strength in a squat pattern with support
Leg pressVery lowLowLeg volume with minimal technique and back loading

Research comparing the lifts is limited, but one study that tested the back squat and hack squat at the same relative loads found that the back squat worked the trunk muscles more, even though people lifted more weight on the hack squat. In practice, that means the hack squat is a handy way to train your legs hard without your back or balance being the limiting factor, while the barbell squat builds more all-round control. If you want to learn the free-weight version, our beginner guide to squatting properly covers it step by step, and our leg press form guide shows how to get the most from the other big leg machine.

You do not have to choose just one. Plenty of people squat with a barbell early in the week and use the hack squat later for extra leg work when they are a little tired.

How should beginners programme the hack squat?

Start with one or two leg sessions a week and use the hack squat as your main lower-body lift or as a second exercise after another squat or hinge.

  • Warm up: 5 minutes of easy cardio, then one or two light sets of 10 on the empty sled.
  • Working sets: 3 sets of 8 to 12 reps, resting about 2 minutes between sets.
  • Effort: finish each set feeling you could do 2 to 3 more good reps.
  • Progress: once you hit 12 clean reps on all three sets, add a small amount of weight next session and drop back to 8 reps.
  • Pair it with: a hamstring or glute exercise such as a Romanian deadlift, plus single-leg work like the Bulgarian split squat.

If you run, keep your hardest leg sessions away from the day before a long run or a key interval session. Heavy leg work tends to leave your legs heavy for a day or two, especially in the first few weeks.

Where does the hack squat fit in a hybrid plan?

For members mixing running, strength and HIIT, the hack squat is a practical way to build leg strength without adding much technical stress. Stronger legs can make hills, sprints and HYROX-style work feel more manageable, though the bigger picture is consistent training across the whole week. The tricky part is placing leg sessions so they support your running rather than fight it.

That is what Edge Pro is built for: one fully personalised plan across running, strength, HIIT and mobility, ready within 24 hours, with a real coach you can message anytime if a machine is busy or a session needs swapping. Edge also has a free plan and Edge Rewards, where logged workouts earn points you can spend on things like coffee and gear.

Train with Edge

A fully personalised plan across running, strength, HIIT and mobility, ready within 24 hours. Message a real coach anytime.

Start free on webDownload on iOSGet it on Android

This article is general guidance, not medical advice. If you are new to exercise, returning from injury, or managing a health condition, speak to your GP before starting, and see a physio for any niggle that does not settle.

Read More Articles

Keep reading.

All articles