Founded in London, UK. We respect your privacy.

Used by 1,500+ happy people

Form guide

Cable woodchop: a beginner's form guide

How to set up and perform high-to-low, low-to-high and horizontal woodchops, the mistakes to avoid, and how rotational core work fits running and HYROX.

TL;DR

  • Turn from your hips and upper back, not your lower back, and keep your arms long.
  • Three versions: high to low (classic chop), low to high (lift) and horizontal (straight across).
  • Start light. Control matters far more than load here, and the lowering half is half the exercise.
  • 2 to 3 sets of 8 to 12 reps per side, once or twice a week, is plenty for beginners.
  • No cable machine? A resistance band anchored to a door or post works well at home.

3

chop directions: high to low, low to high, horizontal

8-12

controlled reps per side for beginners

2-3s

to return the handle on every rep

To do a cable woodchop, stand side-on to a cable machine, hold the handle with both hands and long arms, then rotate through your hips and upper back to pull the handle diagonally across your body, before returning it slowly. The key for beginners is to keep the weight light, the arms long and the lower back quiet, so the turn comes from your hips and mid-back rather than a twist at the waist.

This guide covers set-up, each of the three directions, the cues that make it click, the common mistakes, a home version with a band, and where rotational core work fits if you run or train for HYROX.

What is a cable woodchop and what does it work?

The woodchop is a rotational core exercise named after the chopping motion of an axe. You move a cable handle diagonally (or straight across) your body while your feet stay planted. Most coaches describe it as mainly working the obliques, the muscles at the sides of your trunk, with the deeper abdominal muscles and the rest of the trunk working to keep your spine steady. Your glutes, hips and shoulders help start and guide the movement.

Exactly how much each muscle contributes depends on the direction, load and how you perform it, and the research on this specific exercise is limited, so treat any precise muscle claims you see online with some caution. What is clear is that it trains you to create rotation and, just as importantly, to slow it down under control on the way back.

How do you set up for a cable woodchop?

  • Attachment: a single D-handle or a rope. A D-handle held with both hands (one hand wrapped over the other) is the simplest place to start.
  • Pulley height: top of the column for high to low, bottom for low to high, roughly chest height for horizontal.
  • Stance: side-on to the machine, about an arm and a half away so there is tension on the cable at the start. Feet a bit wider than hip-width, knees soft.
  • Weight: start lighter than you think. If you need to jerk the handle or lean away to move it, it is too heavy.
  • Brace: ribs down, a gentle breath into your belly, and a light tension through your trunk before each rep.

How do you do a high-to-low woodchop step by step?

This is the classic version and the one most people mean by "woodchop".

  • Set the pulley high. Stand side-on with the machine to your right, grab the handle with both hands above your right shoulder, arms long.
  • Brace, then pull the handle down and across your body towards the outside of your left knee, letting your hips and chest turn together.
  • Let your right heel lift and pivot slightly as you turn, so your knee and hip can follow rather than twisting against a fixed foot.
  • Pause briefly at the bottom, then return the handle up and back over two to three seconds, resisting the pull of the cable.
  • Finish all reps on one side, then turn around and repeat.

How do the low-to-high and horizontal versions differ?

Low to high (the lift). Set the pulley at the bottom. Start in a quarter squat with the handle outside your near knee, then stand up as you rotate and drive the handle up and across to finish above the opposite shoulder. Your legs do more of the work here, which makes it feel more like a full-body movement. Keep the finish controlled rather than flinging the handle overhead.

Horizontal. Set the pulley around chest height and pull the handle straight across in front of your chest, turning your hips and chest together. This version is the easiest to learn because there is no height change, so it is a good first choice if the diagonal versions feel awkward.

A useful middle ground is a half-kneeling chop or lift, with the knee nearest the machine down. It takes your legs out of it and makes it much harder to cheat with your lower back.

What cues make the woodchop click?

  • "Belly button follows the hands." Your hips and chest turn as one unit, so you are not just swinging your arms.
  • "Long arms." Keep a soft bend in the elbows but do not pull with your arms. They are just the link to the handle.
  • "Pivot the back foot." Letting the back heel turn protects your knee and lets your hips rotate freely.
  • "Slow on the way back." The return is where you learn to control rotation. Count two to three seconds.
  • "Tall spine." Stay long through the top of your head rather than crunching or arching.

What are the most common woodchop mistakes?

  • Going too heavy. Heavy weight turns a controlled rotation into a yank. Drop the weight until every rep is smooth.
  • Twisting from the lower back. If your hips stay still while your shoulders whip round, the turn is coming from the wrong place. Let the hips move.
  • Pulling with the arms. Bending the elbows hard turns it into an arm exercise. Keep them long.
  • Planted feet. Keeping the back foot locked while you turn puts twist through the knee. Let it pivot.
  • Letting the cable snap back. Rushing the return skips half the benefit and can pull you out of position.
  • Standing too close. With no tension at the start, the first part of the rep does nothing. Step out until the stack lifts slightly.

How do you do a woodchop at home with a band?

Anchor a long loop band or a band with handles to something solid: a door anchor at the top of a door for high to low, at the bottom for low to high, or around a sturdy post at chest height for horizontal. Stand side-on and follow exactly the same steps. Bands get harder the further they stretch, so step closer to the anchor if the end of the movement feels too tough, and check the band and anchor for wear before every session.

With no band at all, you can do a slow woodchop holding a single dumbbell, kettlebell or a medicine ball. It loads the movement differently because gravity pulls straight down rather than along a cable, but it still teaches the hip and trunk pattern.

How does rotational core work fit running and HYROX?

Running is mostly a forward movement, but your trunk is constantly managing small amounts of rotation as your arms and legs swing in opposite directions. Many coaches include rotational and anti-rotation work for runners on the idea that a trunk that controls rotation well may help you hold your form when you are tired. The direct evidence that woodchops make you faster is limited, so think of them as one useful part of a rounded strength routine rather than a magic fix. Our guide to core training for runners explains the anti-movement side in more detail.

HYROX has no rotation station as such, but plenty of it involves keeping your trunk steady under load: farmers carries, sandbag lunges, sled work and wall balls all ask your core to stop you twisting or folding when you are breathing hard. Woodchops, alongside anti-rotation exercises, are a sensible way to build that control in the gym. They also pair naturally with the Pallof press, which trains you to resist rotation rather than create it, and the Russian twist if you want a floor-based option.

How many sets and reps should a beginner do?

For most beginners, 2 to 3 sets of 8 to 12 reps on each side, once or twice a week, is plenty. Place it near the end of a strength session or as part of a core block, rather than right before heavy squats or deadlifts when you want your trunk fresh. A simple pairing that works well:

  • Weeks 1 to 2: half-kneeling horizontal chop, 2 x 10 per side, light weight.
  • Weeks 3 to 4: standing high-to-low chop, 3 x 10 per side, paired with a Pallof press.
  • Weeks 5 to 6: add the low-to-high lift, alternating directions between sessions.

Progress by adding reps first, then a small amount of weight, and only once every rep looks the same as the first. Once the pattern is solid, some people add a slightly quicker pull with a slow return, but there is no need to rush to that. If you would rather not work out where core work fits around your runs and lifts, Edge builds it into one hybrid plan for you.

Train with Edge

A fully personalised plan across running, strength, HIIT and mobility, ready within 24 hours. Message a real coach anytime.

Start free on webDownload on iOSGet it on Android

This article is general guidance, not medical advice. If you are new to exercise, returning from injury, or managing a health condition, speak to your GP before starting, and see a physio for any niggle that does not settle.

Read More Articles

Keep reading.

All articles